-
Utility Anchor
-
Transport Anchor System
-
Threaded Lifting Socket
-
Lifting Anchor
-
Cast In Loop
-
Wire Loop Box
-
Sandwich Panel Anchor System
-
Magnets
-
Fixing Socket
-
Coil and Ferrule Loop Insert
-
Cast In Channel
Featured Products
Two Hole Anchor
Chontan Two Hole Anchor from China When there is limited concrete strength or a thin slab, the full safe working load can be reached by inserting a tension bar in the second hole. On request, longer anchors with more holes can be made. For permanently joining precast concrete structural pieces, Chontan has been producing products.
Plastic Recess Former and Fitting
Chontan Plastic Recess Former and Fitting from China is used with any of the Ring-Lift anchors. It provides a fast and accurate void, with a consistent shape for smooth lifter attachment. Fixing Plates are fastened to the formwork and then used to hold the rubber former and erection anchor in place.
Combination Ring Clutch
Chontan combination ring clutches supplied by China can be used to raise any sort of ring anchor that falls inside its load category. The clutch head is an all-cast piece that is particularly built not only to fit the erection anchor of its associated safe working load, but also to match the groove made by the equivalent capacity rubber former.
ABout US
Chontan is a single source supplier of precast concrete accessories in China. Offers a wide variety of lifters and connectors suitable for all your precast needs. Supporting the precast and prestress industries for over 20 years. Products include lifting anchor, transport anchor, threaded lifting socket, insulated panel anchor, cast in channel, coil and ferrule loop inserts, cast-in loop, formwork and scaffolding applications, and so on. Make the precast concrete transport and build in an efficient, faster and safer way.
Featured Products
Flat Anchor
Chontan Flat Anchor supplied by China is alternative to the plate anchor. Flat anchors be used in conjunction with additional reinforcing. Horizontal reinforcement bars placed across the base provide support for it. Anchors be exploited to its fullest extent for both lifting and turning with this form of load transfer.
Unilateral Erection Anchor
Chontan Unilateral Erection Anchor from China is similar Application as Erection Anchor. In contrast to the erection anchor, Unilateral erection anchor can only be subjected to load in one direction. Its shape makes it particularly suitable for thin components. A semi-circular notch is provided for fitting of the turning reinforcement.
Spread Anchor
The Chontan Spread Anchor supplied by China is designed with a spread-foot that produces exceptional pull-out capacity. This versatile anchor can be used in the face, back or edge of panels for back stripping and rotation from horizontal to vertical. This anchor can be pulled in any direction if minimum edge distance is maintained.
Erection Anchor
Chontan Erection Anchors contain additional holes for attaching the required additional reinforcement, and they are specifically made for turning precast units. The additional shoulders on the anchor's head contact with the spread anchor ring clutch and absorb shear loads that would typically be supported by the anchor's created pocket's thin edge.
